Fest Flags
Since 2017

Motorcycle flag sizes

What size flag do I need for my motorcycle?
For most bikes, go 6×9 in double sided with 4x stitching. The bike flag we make the most is the 6×9 double sided. Want more flag? 9×12 and 12×18 in are the other sizes riders pick. All three are made to ride, highway included, and we don't put a speed cap on them.

The three sizes riders pick

Size What it's like Good for
6×9 in Small and tidy, still reads from the bike behind you Daily riding, long trips, matching group flags
9×12 in A step up, more room for a logo Baggers and tourers with a solid rack mount
12×18 in The big one, easy to read from the curb Lead bikes, parades, memorial rides

We also make 10×15, 14×28 and 16×24 in, plus 2×3 and 3×5 ft for a pole at camp or the clubhouse. They're all on the same product page.

Size it to your mount and your design

A short pole on a sissy bar looks right with a 6×9. A tour-pack rack can carry a 9×12 or a 12×18. A bigger flag pulls harder on the pole and the mount, so make sure yours is solid before you go up a size.

Then think about what's on it. A club name or a rider's name reads well on a 6×9. A full paragraph doesn't. Keep text short and bold, use high contrast, and make the logo big. On a small flag the stitching takes up more of the edge, so keep words and logos clear of it. Our stitching guide shows how much room to leave.

Single or double sided?

Most bike flags we make are double sided: two printed pieces with a liner sewn between them, so your design reads right on both sides with no see-through. Single sided is one piece of fabric. It's lighter, and the back shows your design in reverse at about 75 to 85% strength. Up to you. Here's the full comparison.

How much stitching?

Single or double sided, our pick for bike flags is 4x PrecisionLock™ stitching plus tight corner cross stitching. On a bike flag, that means more rows on all four edges and cross-stitched corners, the spots that fray first in the wind. Four lines is plenty on a flag this size. You don't need 6x.

On the highway

Ride it. The fabric is picked for highway riding. Here's the honest part: stitching slows fraying down. It doesn't stop wind. On a bike, three things help:

  • Give it clear air. A flag tucked tight behind a tour pack, or slapping the tail light, wears where it hits. Set the pole so the flag flies free.
  • Check the clamp at fuel stops. A long day of vibration works mounts loose. A quick twist at each stop keeps the pole upright.
  • Hauling the bike? Pull the flag before it rides the trailer. Freeway wind on a strapped-down bike frays it just the same.

Once the frayed edge eats into the stitching rows, order a fresh one. A spare in the saddlebag saves the trip. More in our make a flag last guide.

Three small flags on white sleeves on a motorcycle rack mount, including a yellow In Honor PGR flag
Most made
Custom motorcycle flag

Your design at 6×9 in, double sided, the size we make the most for bikes.

  • 2 ClawGrip™ grommets, or a .75 in Oxford sleeve in black or white
  • Add 4x PrecisionLock™ stitching plus tight corner cross stitching
Build your bike flag

What our customers say

Have a question? Hit us up.

Tell us what you ride and how you'll mount it, and we'll help you pick the size.

Keep reading

Sources (read November 14, 2026)
  • Sizes, sides, finishing and stitching options: festflags.com motorcycle flag product page