Fest Flags
Since 2017

Flag care, the easy way

How do I clean and care for my flag?
Spot clean your flag with a 50/50 mix of water and white vinegar, and keep it out of the washer, the dryer and full soaks. Give it a coat of Scotchgard for the sun, tape the edges and corners with ripstop tape, and lower it when you're not using it. Ironing is a last resort: lowest setting, with a cloth in between.

Spot clean it, never machine wash it

Tiny dust particles work their way into the fabric. Every time the flag snaps against itself, that dust grinds at the fibers, so a dirty flag wears out faster than a clean one. When yours looks dusty or dirty, wipe it down with a 50/50 mix of water and white vinegar.

Skip the washing machine and the dryer. They break fabric down over time, the same way they wear out a favorite shirt. Don't dunk the whole flag in water either. Spot clean only.

A hand spraying a cleaning mix onto a flag

Give it some sun protection

The sun is undefeated. It wears down every fabric over time, and a flag lives in it. A coat of Scotchgard™ Water & Sun Shield helps guard your flag against the sun. 303® Marine Fabric Guard brings back water repellency on marine fabrics. Follow the directions on the bottle.

A can of Scotchgard Outdoor Sun and Water Shield next to a spray bottle of 303 Fabric Guard

Tape the edges and corners

Ripstop tape, also sold as gaffer tape, is a seriously strong tape made for patching sailboats, tents and parachutes. Run it along the edges or corners of your flag and it adds real strength at the seams. It comes in plenty of colors. Search "ripstop tape" or "gaffer tape" to find it.

Hands pressing a strip of black tape along the edge of a flag

Lower it when it's off duty

A flag up all night is wearing out with nobody looking at it. Bring it down at night and whenever it's not in use, and it'll stay looking good for longer.

Ironing, only if you have to

Most flags flatten out on their own once they're flying. If you really need to iron one, use the lowest setting only, and lay a shirt or cloth between the iron and the flag so it doesn't get too hot.

A hand pressing an iron over a flag while the other hand smooths the fabric
Riding or boating with it?

Care is half of it. Size, speed and stitching are the other half, and they're in make your flag last and our stitching guide.

Finished Fest Flags custom flag with a USA map design and a black sleeve, held up to show the print
Custom flags
Your design, made to fly

Pick your size and sides, then give it the care above.

  • Our PolyFusion fabric
  • ClawGrip™ grommets or a sleeve, your call
  • Add PrecisionLock™ stitching plus tight corner cross stitching
Build a 3×5 ft single sided

What our customers say

Have a question? Hit us up.

Not sure how to look after yours? Send us a photo and tell us where it flies, and we'll walk you through it.

Keep reading